Tank Valve
Tank Valve
| Shop | ||||
|
Catalina 80 Cubic Aluminum Tank with Pro Valve - Electric/Purple from $ 159.95 Stock Status : In 1 Stores 
|
|||
|
Catalina 80 Cubic Aluminum Tank with Pro Valve - Electric/Red from $ 149.95 Stock Status : In 3 Stores
|
|||
|
Catalina 80 Cubic Aluminum Tank with Pro Valve - White from $ 159.95 Stock Status : In 1 Stores
|
|||
|
Dolphin Tech By IST JT-65D Twin Tank Technical BCD from $ 935.00 Stock Status : In 2 Stores
|
|||
|
Catalina 80 Cubic Aluminum Tank with Pro Valve - Shot Blast from $ 159.95 Stock Status : In 2 Stores
|
|||
|
Catalina 80 Cubic Aluminum Tank with Pro Valve - Sanded no Paint from $ 159.95 Stock Status : In 1 Stores
|
|||
|
Catalina 80 Cubic Aluminum Tank with Pro Valve - Neon Pink from $ 159.95 Stock Status : In 1 Stores
|
|||
|
Catalina 80 Cubic Aluminum Tank with Pro Valve - Electric Blue from $ 159.95 Stock Status : In 1 Stores
|
|||
|
Catalina Pony Bottle Tanks, Yellow with Pro Valve - 30 Cu. from $ 124.99 Stock Status : In 1 Stores
|
|||
|
Blue Steel Faber Low Pressure Steel Tank - 95 cu, 15L from $ 329.95 Stock Status : In 2 Stores
|
|||
|
Itt Jabsco Par Y Valve Y-valve 45490-1000 In Box (ITT Jabsco) from $ 47.88 The Jabsco Y-Valve is designed to provide flexibility of onboard waste management by diverting waste either into an onboard holding tank or directly overboard where legal to do so. Check local and Federal regulations to determine where direct overboard discharge of untreated waste is permitted. No overboard discharge of untreated waste is allowed within three miles of shore.Some near shore areas and inland areas are designated as "No-Discharge Zones" where the discharge of any onboard waste, even treated waste is strictly prohibited. Many of these areas require a waste retention system that can be positively secured in an onboard retention mode. The Jabsco Y- Valve accommodates this requirement by providing the ability to add a padlock that secures the selector handle in either direction to ensure waste is directed to an onboard holding tank. Stock Status : In 10 Stores
|
|||
|
Blue Steel Faber High Pressure Steel Tank - 149 cu, 19.0L from $ 424.95 Stock Status : In 1 Stores
|
|||
|
Blue Steel Faber High Pressure Steel Tank - 120 cu, 15.3L from $ 339.95 Faber FX 120 Series 3442psi CylinderFaber quality triple protected zinc, epoxy and polyurethane finish. Stock Status : In 2 Stores
|
|||
|
Ninja Black Pearl Carbon Fiber Air Tank w/ Super High Pressure Regulator - 50/4500
USD 174.95 ** THIS TANK IS MADE BY NINJA PAINTBALL AND IS EXCLUSIVELY DISTRIBUTED THROUGH ANSGEAR ONLY!!!The Ninja Paintball tank is one of the newest and most respected tanks in the paintball industry. This 50/4500 tank is made specifically for tournament level paintball players. This 50 cubic inch, 4500 PSI tank will get you about 900-1000 shots off one fill. This is great for any competitive or scenario player. MADE IN THE USA!!!!SRT piston Sonic Recharge Technology piston plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot downMFV Mini Fill Valve Non wrist digging, low profile design fill valveAll black tactical lookMeets all DOT, CGA and ASTM specificationsCompletely rebuildable by the end userEvery regulator is hand crafted and factory testedSuper low response curve 0-50 psi from full to emptySafetyASTM COMPLIANT bonnet threadASTM COMPLIANT DOT burst discASTM COMPLIANT Low pressure burst diskASTM COMPLIANT Restrictor, bleed hole and safety grooveMini Fill Valve IS hardened, plated 5000 psi ratedReg installed to ASTM specifications***NOTE*** This tank do not come with a free thread protector. 
Notes : Stock Status : in-stock
|
|||
|
Spyder Paintball MR4 PRO 4+1 9oz Tank Mega Set
USD 179.95 MR4 PRO 4+1 9oz Tank Mega SetNEW for 2012 the Spyder MR4 PRO features the extremely efficient EKO Valve System doubles your air efficiency! This tactical powerhouse delivers a realistic military look including multiple Picatinny Rails for endless scenario modifications. The modern superpower has arrived.Features Mil-Sim Style Semi-Auto Paintball MarkerEKO Valve System (Patent Pending)1600 Shots On a 20oz TankShoulder Stock12" Micro Ported Barrel with Muzzle BreakBarrel Shroud with Ring SightRaised Sight RailMultiple Picatinny Rail Mounting SystemMagazine Style ForegripHigh Impact Polymer Off-Set Clamping Feed NeckSide Cocking Aluminum BoltQuick Release Striker Plug Pull PinShort Pull Single TriggerHigh Impact Polymer Trigger FrameSteel Braided HoseExternal Velocity AdjusterOperates on CO2 or Compressed AirMRX Carry handle w/sightMRX Adjustable Stock200 Round Gravity Loader IncludedGXG XVSN Mask with Visor & Anti Fog Lens premium 9 oz air tank 4+1 Deluxe Paintball Harness 4-140 Round Heavy Duty Tubes 21" Jerk Squeegee(color varies) Premium 1oz Oil
Notes : Free Shipping on all Orders Over $99. Stock Status : in-stock
|
|||
|
Ninja Carbon Fiber Air Tank w/ Adjustable Regulator - 50/4500
USD 149.95 The Ninja Paintball tank is one of the newest and most respected tanks in the paintball industry. This 50/4500 tank is made specifically for tournament level paintball players. This 50 cubic inch, 4500 PSI tank will get you about 900-1000 shots off one fill. This is great for any competitive or scenario player. MADE IN THE USA!!!!SRT piston Sonic Recharge Technology piston plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot downSPA Shim Pressure Adjustment- change output pressure by adding or removing shims, not springs or pistonsMFV Mini Fill Valve Non wrist digging, low profile design fill valveAll black tactical lookBrass or optional Aluminum bonnet - see regulator parts for detailsMeets all DOT, CGA and ASTM specificationsCompletely rebuildable by the end userEvery regulator is hand crafted and factory testedSuper low response curve 0-50 psi from full to emptySafetyASTM COMPLIANT bonnet threadASTM COMPLIANT DOT burst discASTM COMPLIANT Low pressure burst diskASTM COMPLIANT Restrictor, bleed hole and safety grooveMini Fill Valve IS hardened, plated 5000 psi ratedReg installed to ASTM specifications***NOTE*** This tank do not come with a free thread protector.
Notes : Stock Status : in-stock
|
|||
|
Jabsco Y-valve
USD 53.99 Manufacturer:Jabsco Model:45490-1000 Y-Valve The Jabsco Y- Valve accommodates this requirement by providing the ability to add a padlock that secures the selector handle in either direction to ensure waste is directed to an onboard holding tank. The Y-Valve may also be used to direct waste from a holding tank to an onboard waste discharge pump for holding tank evacuation or, alternatively, to a waste deck plate for removal by a shoreside pump-out facility. The Y- Valve may also be used in a bilge pumping system to select between two separate bilge pickups in different bilge compartments providing for evacuation of two separate bilge areas with only one bilge pump. Features: Chemical and corrosion resistant polypropylene and stainless steel construction Selector lever can be padlocked (lock not included) and/or sealed in either position Ports can be rotated so discharge plumbing can be routed away in parallel, at 900 or in opposite directions, or either up or down without disassembly Valve is supplied with bot
Notes : Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. Stock Status : in-stock
|
|||
|
Ninja Carbon Fiber Air Tank w/ Adjustable Regulator - 70/4500
USD 130.77 The Ninja Paintball tank is one of the newest and most respected tanks in the paintball industry. This 70/4500 tank is made specifically for tournament level paintball players. This 70 cubic inch, 4500 PSI tank will get you about 1200-1300 shots off one fill. This is great for any competitive or scenario player. MADE IN THE USA!!!!SRT piston - Sonic Recharge Technology piston - plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot downSPA - Shim Pressure Adjustment - change output pressure by adding or removing shims, not springs or pistonsMFV - Mini Fill Valve - Non wrist digging, low profile design fill valveAll black tactical lookBrass or optional Aluminum bonnet - see regulator parts for detailsMeets all DOT, CGA and ASTM specificationsCompletely rebuildable by the end userEvery regulator is hand crafted and factory testedSuper low response curve 0-50 psi from full to emptySafetyASTM COMPLIANT bonnet threadASTM COMPLIANT DOT burst discASTM COMPLIANT Low pressure burst diskASTM COMPLIANT Restrictor, bleed hole and safety grooveMini Fill Valve IS hardened, plated 5000 psi ratedReg installed to ASTM specifications***NOTE*** This tank do not come with a free thread protector.
Notes : Stock Status : in-stock
|
|||
|
Ninja Carbon Fiber Air Tank w/ Adjustable Regulator - 90/4500
USD 159.95 The Ninja Paintball tank is one of the newest and most respected tanks in the paintball industry. This 90/4500 tank is made specifically for tournament level paintball players. This 90 cubic inch, 4500 PSI tank will get you about 1500 shots off one fill. This is great for any competitive or scenario player. MADE IN THE USA!!!!SRT piston Sonic Recharge Technology piston plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot downSPA Shim Pressure Adjustment- change output pressure by adding or removing shims, not springs or pistonsMFV Mini Fill Valve Non wrist digging, low profile design fill valveAll black tactical lookBrass or optional Aluminum bonnet - see regulator parts for detailsMeets all DOT, CGA and ASTM specificationsCompletely rebuildable by the end userEvery regulator is hand crafted and factory testedSuper low response curve 0-50 psi from full to emptySafetyNinja Paintball Tank ASTM COMPLIANT bonnet threadNinja Paintball Tank ASTM COMPLIANT DOT burst discNinja Paintball Tank ASTM COMPLIANT Low pressure burst diskNinja Paintball Tank ASTM COMPLIANT Restrictor, bleed hole and safety grooveNinja Paintball Tank Mini Fill Valve IS hardened, plated 5000 psi ratedNinja Paintball Tank Reg installed to ASTM specifications***NOTE*** This tank do not come with a free thread protector.
Notes : Stock Status : in-stock
|
|||
|
Ninja Carbon Fiber Air Tank w/ Ultralite Regulator - 90/4500
USD 167.95 The Ninja Paintball tank is one of the newest and most respected tanks in the paintball industry. This 90/4500 tank is made specifically for tournament level paintball players. This 90 cubic inch, 4500 PSI tank will get you about 1500 shots off one fill. This is great for any competitive or scenario player. MADE IN THE USA!!!!SRT piston Sonic Recharge Technology piston plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot downSPA Shim Pressure Adjustment- change output pressure by adding or removing shims, not springs or pistonsMFV Mini Fill Valve Non wrist digging, low profile design fill valveAll black tactical lookBrass or optional Aluminum bonnet - see regulator parts for detailsMeets all DOT, CGA and ASTM specificationsCompletely rebuildable by the end userEvery regulator is hand crafted and factory testedSuper low response curve 0-50 psi from full to emptySafetyNinja Paintball Tank ASTM COMPLIANT bonnet threadNinja Paintball Tank ASTM COMPLIANT DOT burst discNinja Paintball Tank ASTM COMPLIANT Low pressure burst diskNinja Paintball Tank ASTM COMPLIANT Restrictor, bleed hole and safety grooveNinja Paintball Tank Mini Fill Valve IS hardened, plated 5000 psi ratedNinja Paintball Tank Reg installed to ASTM specifications***NOTE*** This tank do not come with a free thread protector.
Notes : Stock Status : in-stock
|
|||
|
Ninja Carbon Fiber Air Tank w/ Ultralite Regulator - 50/4500
USD 161.95 The Ninja Paintball tank is one of the newest and most respected tanks in the paintball industry. This 50/3000 tank is made specifically for tournament level paintball players. This 50 cubic inch, 4500 PSI tank will get you about 900-1000 shots off one fill. This is great for any competitive or scenario player. MADE IN THE USA!!!!SRT piston Sonic Recharge Technology piston plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot downSPA Shim Pressure Adjustment- change output pressure by adding or removing shims, not springs or pistonsMFV Mini Fill Valve Non wrist digging, low profile design fill valveAll black tactical lookBrass or optional Aluminum bonnet - see regulator parts for detailsMeets all DOT, CGA and ASTM specificationsCompletely rebuildable by the end userEvery regulator is hand crafted and factory testedSuper low response curve 0-50 psi from full to emptySafetyASTM COMPLIANT bonnet threadASTM COMPLIANT DOT burst discASTM COMPLIANT Low pressure burst diskASTM COMPLIANT Restrictor, bleed hole and safety grooveMini Fill Valve IS hardened, plated 5000 psi ratedReg installed to ASTM specifications***NOTE*** This tank do not come with a free thread protector.
Notes : Stock Status : in-stock
|
|||
|
Ninja Black Pearl Carbon Fiber Air Tank w/ Super Low Pressure Regulator - 50/4500
USD 174.95 ** THIS TANK IS MADE BY NINJA PAINTBALL AND IS EXCLUSIVELY DISTRIBUTED THROUGH ANSGEAR ONLY!!!The Ninja Paintball tank is one of the newest and most respected tanks in the paintball industry. This 50/4500 tank is made specifically for tournament level paintball players. This 50 cubic inch, 4500 PSI tank will get you about 900-1000 shots off one fill. This is great for any competitive or scenario player. MADE IN THE USA!!!!SRT piston Sonic Recharge Technology piston plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot downMFV Mini Fill Valve Non wrist digging, low profile design fill valveAll black tactical lookMeets all DOT, CGA and ASTM specificationsCompletely rebuildable by the end userEvery regulator is hand crafted and factory testedSuper low response curve 0-50 psi from full to emptySafetyASTM COMPLIANT bonnet threadASTM COMPLIANT DOT burst discASTM COMPLIANT Low pressure burst diskASTM COMPLIANT Restrictor, bleed hole and safety grooveMini Fill Valve IS hardened, plated 5000 psi ratedReg installed to ASTM specifications***NOTE*** This tank do not come with a free thread protector.
Notes : Stock Status : in-stock
|
|||
|
Jabsco Y-Valve
USD 54.99 Y-ValveThe Jabsco Y-Valve is designed to provide flexibility of onboard waste management by diverting waste either into an onboard holding tank or directly overboard where legal to do so. Check local and Federal regulations to determine where direct overboard discharge of untreated waste is permitted. No overboard discharge of untreated waste is allowed within three miles of shore.Some near shore areas and inland areas are designated as "No-Discharge Zones" where the discharge of any onboard waste, even treated waste is strictly prohibited. Many of these areas require a waste retention system that can be positively secured in an onboard retention mode. The Jabsco Y- Valve accommodates this requirement by providing the ability to add a padlock that secures the selector handle in either direction to ensure waste is directed to an onboard holding tank. The Y-Valve may also be used to direct waste from a holding tank to an onboard waste discharge pump for holding tank evacuation or, alternatively, to a waste deck plate for removal by a shoreside pump-out facility.The Y- Valve may also be used in a bilge pumping system to select between two separate bilge pickups in different bilge compartments providing for evacuation of two separate bilge areas with only one bilge pump.Features:Chemical and corrosion resistant polypropylene and stainless steel constructionSelector lever can be padlocked (lock not included) and/or sealed in either positionPorts can be rotated so discharge plumbing can be routed away in parallel, at 900 or in opposite directions, or either up or down without disassemblyValve is supplied with both 1-1/2" (38 mm) ports (fitted) and extra 1" (25 mm) straight inlet portOptional shaft extension allows valve to be mounted through a bulkhead up to 1-3/4" thick with only the selector handle exposedSelf cleaning design provides trouble free operationMolded in flow direction indicator arrowsEasy access to three sturdy mounting feet for quick and simple installationEasy access to valve by removal of just three hex head machine screws, top cover and diverter assembly lift away from the body
Notes : Stock Status : in-stock
|
|||
|
Ninja Black Pearl Carbon Fiber Air Tank w/ Super Mid Pressure Regulator - 50/4500
USD 174.95 ** THIS TANK IS MADE BY NINJA PAINTBALL AND IS EXCLUSIVELY DISTRIBUTED THROUGH ANSGEAR ONLY!!!The Ninja Paintball tank is one of the newest and most respected tanks in the paintball industry. This 50/4500 tank is made specifically for tournament level paintball players. This 50 cubic inch, 4500 PSI tank will get you about 900-1000 shots off one fill. This is great for any competitive or scenario player. MADE IN THE USA!!!!SRT piston Sonic Recharge Technology piston plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot downMFV Mini Fill Valve Non wrist digging, low profile design fill valveAll black tactical lookMeets all DOT, CGA and ASTM specificationsCompletely rebuildable by the end userEvery regulator is hand crafted and factory testedSuper low response curve 0-50 psi from full to emptySafetyASTM COMPLIANT bonnet threadASTM COMPLIANT DOT burst discASTM COMPLIANT Low pressure burst diskASTM COMPLIANT Restrictor, bleed hole and safety grooveMini Fill Valve IS hardened, plated 5000 psi ratedReg installed to ASTM specifications***NOTE*** This tank do not come with a free thread protector.
Notes : Stock Status : in-stock
|
|||
|
Hart Systems Tank Tender 4 System, 30/35 Gauge
USD 649.00 Hart Systems Tank Tender 4 System, 30/35 Gauge . Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. Gauges read in inches for diesel and water, however, monitoring waste holding tanks is possible with optional Purge Valve Toggle Switch used to clear waste holding tank PTF tubes before taking a reading. We offer systems here for 30" deep tanks. Each system includes gauge/tank-selection panel, 30' nylon tubing per tank (continuous roll) and tank 30" penetration fittings. Panels measure 4"W x 8"H x 2-7/8"D. 3-1/16"W x 5"H cutout required. Randy Repass, the founder of West Marine, has one installed on his boat and he says "...the main reason for using Tank Tender is Reliability. There are no electronics to fail. Tank Tenders have been installed on quality production boats for years". You'll find Tank Tenders on Nordhavn, Gunboat, Hinckley and many others. Before Tank Tender, you had to rely on an old-fashioned dip stick, site glass or electric float gauge to check the level of your boat's fuel, water or holding tank. Not anymore. Tank Tender provides extremely accurate readings for up to ten tanks. Without electricity. Without leaving the bridge. Without a doubt. Tank Tender operates on air pressure. Select the tank, then pump a small amount of air through tubing to the bottom of the tank. When the air pressure in the tube equals the liquid pressure at the bottom of the tank, the gauge displays this pressure in inches of liquid. Tank Tender's Features include: It's convenient. Monitors the levels in all tanks with just one instrument. It's easy to use. You can select a tank to measure and get an accurate measurement from the bridge in two or three seconds. It's simple to install. The average 4-tank system takes about an hour per tank. And there's nothing to wire. It's surprisingly inexpensive.Tank Tender costs much less than other industrial systems offering similar accuracy and reliability.
Notes : Low Price Guarantee Stock Status : in-stock
|
|||
Where better to hold the tank and the water shutoff valve is?
I Going into the tank for water shutoff, just one out, and Pipe-work some do. If you just shut up before the tank Valves go, I'll be quiet I just have to do is empty Full tank), gallons (100 jiteulhaji really. Operations require Such. I need to work on the part of the power down? Foot Pump tank Over the 15 or so currently. Unless the valve keotohpeue They are buried, there's a No, I think so. I was able to I will not do anything before you have to piece together the most. I shut off the power breaker and then found I could do The valve is closed and cut all the pipes. There Spray Just a little bit, but for a few seconds, then it trickle steadied and I was a little thing can be. Well, the leak Pressure Fittings come in (except for a few more leaks fixed path I). I have a fear there is some dirt or something. Tomorrow I I'll fix it, but everything's fine now. Thank you to everyone For help!
It is illegal to impose PUT IT 42 Well pressure tank blocks. You need a tank eruptions. Pressure Tanks Probably corresponds to the 100 GAL. At that time the tank is full If you're shooting about 30 gallons of water Would you hold top water.
Removing Water Softener Valve from Tank ( standard threaded tank )
Sunizona store loses roof in storm
Los Campas Store and the surrounding area in Sunizona suffered major damage from a microburst storm Tuesday, Aug. 24, at about 2 p.m.
September 3rd, 2010 in
swimming and more | tags: air, carbon, fiber, propane tank valve, propane tank valve stuck, tank, tank valve, tank valve toilet, tank valves, valve